Sithija Ranaraja

All projectsManipulation

Hydra

Six-axis manipulator from CAD and PCB to real-time control

Build film: printing the links and assembling the arm with its servos and electronics.Hardware

Hydra is a 6-DOF arm I designed in SolidWorks, 3D printed and wired up with a custom PCB. A ROS 2 workspace gives it MoveIt 2 planning in simulation and on the bench, and MoveIt Servo for real-time Cartesian control.

Type
Hardware
Period
Feb 2025
Role
Sole developer
Stack
ROS 2, MoveIt 2, MoveIt Servo, ros2_control, SolidWorks, PCB design, 3D printing, C++
Links
GitHub repository

Challenge

I wanted an arm for planning and control experiments without paying for a commercial one, but with the same software interface a commercial arm would have.

Approach

I wrote the ros2_control hardware interface so one codebase drives the simulated and the physical arm. MoveIt 2 plans; MoveIt Servo jogs the tool in Cartesian space.

Result

The prototype executes MoveIt plans on the bench. Simulation and hardware share one workspace.

What I built

  • CAD, PCB, electronics, 3D printing and assembly
  • MoveIt 2 trajectory planning
  • MoveIt Servo for real-time control
  • ros2_control hardware interface tested on the real arm