All projectsMobile robotics
Voyager
Mobile robot platform built from the ground up
Voyager is a differential-drive robot I designed and built from scratch: enclosure in SolidWorks, custom electronics, firmware and the ROS 2 stack. It is the base I try navigation and perception ideas on before they go onto other robots.
- Type
- Hardware
- Period
- Jan 2025
- Role
- Sole developer: mechanical design, electronics, firmware, ROS 2 software
- Stack
- ROS 2 Humble, Nav2, SLAM Toolbox, Gazebo, SolidWorks, Raspberry Pi 5, Arduino Portenta H7, Xiaomi LDS LiDAR, IMU, C++, Python
Challenge
Research bases are expensive and closed. I wanted one where every layer could be changed, from motor control up to navigation.
Approach
Compute is split in two. A Raspberry Pi 5 runs ROS 2 and the autonomy; an Arduino Portenta H7 runs the motor control loop. A Xiaomi LDS LiDAR gives the scans for mapping and an IMU steadies localisation. SLAM, Nav2 and teleop were brought up in Gazebo in parallel with the hardware.
Result
The robot drives autonomously under Nav2 and by hand under teleop. The Gazebo model matches it one to one.
What I built
- Chassis, enclosure, electronics, firmware and software all built in-house
- Two-tier compute: Raspberry Pi 5 for autonomy, Portenta H7 for motor control
- LiDAR and IMU sensor fusion for SLAM
- Nav2 autonomous navigation and teleop, mirrored in Gazebo