Sithija Ranaraja

All projectsMobile robotics

Voyager

Mobile robot platform built from the ground up

Build film: simulation, 3D printing, assembly, electronics bring-up and SLAM navigation.Hardware

Voyager is a differential-drive robot I designed and built from scratch: enclosure in SolidWorks, custom electronics, firmware and the ROS 2 stack. It is the base I try navigation and perception ideas on before they go onto other robots.

Type
Hardware
Period
Jan 2025
Role
Sole developer: mechanical design, electronics, firmware, ROS 2 software
Stack
ROS 2 Humble, Nav2, SLAM Toolbox, Gazebo, SolidWorks, Raspberry Pi 5, Arduino Portenta H7, Xiaomi LDS LiDAR, IMU, C++, Python
Links
GitHub repository Build video Hardware video

Challenge

Research bases are expensive and closed. I wanted one where every layer could be changed, from motor control up to navigation.

Approach

Compute is split in two. A Raspberry Pi 5 runs ROS 2 and the autonomy; an Arduino Portenta H7 runs the motor control loop. A Xiaomi LDS LiDAR gives the scans for mapping and an IMU steadies localisation. SLAM, Nav2 and teleop were brought up in Gazebo in parallel with the hardware.

Result

The robot drives autonomously under Nav2 and by hand under teleop. The Gazebo model matches it one to one.

What I built

  • Chassis, enclosure, electronics, firmware and software all built in-house
  • Two-tier compute: Raspberry Pi 5 for autonomy, Portenta H7 for motor control
  • LiDAR and IMU sensor fusion for SLAM
  • Nav2 autonomous navigation and teleop, mirrored in Gazebo